11/20/2022 0 Comments Tp link powerline utility pa4020![]() ![]() You also get fewer Ethernet ports with the Solwise adaptors. Unlike the TL-PA 4220P adaptors, the Solwise adaptors protrude downwards, which could make them difficult to use in mains sockets located just above skirting boards or worktops. However, the Solwise adaptors transferred data at 39.7Mbit/s when 10 metres apart, which is only a little higher than the TL-PA4220P kit. Perhaps the best alternative to the TL-PA4220P kit is a pair of Solwise NET-PL-500AV-PIGGY adaptors (£25 each from as the Solwise adaptors have gigabit Ethernet ports for higher throughput. If we had a laptop plugged into one adaptor, it wouldn’t detect the other one, for example, even though everything was set up and working correctly. The TP-Link Powerline networking utility looks better than it did in 2013, but it’s very basic and didn’t always work as expected. The Devolo kit also has a better utility than the TP-Link TL-PA4220P kit, too. This Devolo kit is more than twice the price of the TL-PA4220P kit, however. We’ve seen faster results from kits such as the Devolo dLAN 650 Triple+ Starter Kit which transferred data at 167.7Mbit/s next to each other and 50Mbit/s when 10 metres apart. However, the advantage of using a powerline networking adaptor is the ability to route data to parts of your house where a Wi-Fi signal would be impeded by items such as walls and bulky furniture. When tested 10 metres apart, the adaptors produced a data transfer speed of 37.9Mbit/s, which is around the speed we’d expect from a similarly priced router. This is more than fast enough to stream Full HD movies and music, but it’s highly unlikely anyone will use them at this distance. We ran our data transfer benchmarks with the adaptors one metre apart, and saw a result of 90.1Mbit/s, which we expected. However, the adaptors’ Ethernet ports are rated at 10/100Mbit/s, so you certainly won’t get 500Mbit/s coming out them. The adaptors in the TL-PA4220P Starter Kit are rated at 500Mbit/s, so that is the theoretical speed at which it’ll transmit data through the electrical mains. Indeed, kits such as this are perfect for connecting home cinema and media and devices. To set up the kit physically, you simply have to plug one adaptor into a mains socket and connect it to your router or ADSL modem with an Ethernet cable, and plug the other adaptor into a mains socket near the device you want to connect to your network, whether that’s a PC, laptop, TV or games console.Īs each adaptor has two Ethernet ports you can attach more than device, so you can connect your Smart TV and Sky+ HD box to one adaptor, for instance, and connect your router and a PC to the other. Powerline networking works by routing network traffic through your electrical mains wiring rather than through an Ethernet cable or via Wi-Fi, and it can route the network traffic at a very fast rate. The extra Ethernet ports mean you can connect more than one device to the adaptors and the pass-through socket means you don’t have to lose a mains socket that could be used for your TV, games console or extension bar. ![]() I've tried various things, including disconnecting the ethernet cable from the PA4010, switching my PC internet connection from wired to wireless, factory resetting the PA4010 and the PA4020's then pairing them again, but nothing works, I still can't get access to rename the extenders with my main router SSID, or change the default password on them.Īll I want is a way to access the web-based management utility, but none of the solutions offered by the TP-LINK help pages works.The TP-Link TL-PA4220P Start Kit is a Powerline networking kit comprised of two adaptors, each with two Ethernet ports and a pass-through plug socket. ![]() Connect to the Powerline Extender wirelessly". The second option is to use, but whilst that loads a web page, it shows an error message saying, "If you're connecting to the Router directly, you will be unable to access the Powerline Extender's management page by using. The default for these is admin/admin, but this doesn't work. There seem to be two ways to access this: The first is by using the IP address 192.168.1.1 This brings up a login panel asking for a username and password. I am a Linux user and since TP-LINK don't supply their network management application for this OS, I tried using the web-based manager. The router is not the one from our previous house, but a new one (Huwawei HG656b). After we moved however, I installed them at the new location and found that the SSID's were no longer the same as my router. These were previously installed in another house and worked perfectly, all using the same SSID and password, which made moving around the house seamless. I have a TP-LINK TL-PA4010 AV500 powerline adapter connected to my router and three TL-PA4020 AV500 ethernet/wireless extenders plugged in around the house. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |